Cable display systemsAdditionnal components

- For 1.2mm diameter cables
– Panel thickness ; 12mm (1/2″)
– Do not use with glass panels
– Working load up to 15 kg
– 5: 1 safety factor

- For cables up to 1.5mm diameter (1/16'')
– Panel thickness ; 6mm (1/4″)
– Do not use with glass panels
– Working load up to 15 kg
– 5: 1 safety factor

The Hook panel support provided by Mustang Systems allows you to suspend and secure your installation. Quick installation, adjustable, aesthetic & resistant.

– Compatible with 1.2mm up to 1.5mm cable
– Working load up to 15 kg

Galvanized Steel Câble Top Hat - 16.5' (5m)
- ∅ 1,2mm
- Cable length ; 16.5' (5m)

Galvanized Steel Câble Top Hat - 6.5' (2m)
- ∅ 1,2mm
- Cable length ; 6.5' (2m)

Galvanized Steel Câble Top Hat - 13' (4m)
- ∅ 1,2mm
- Cable length ; 13' (4m)

Galvanized Steel Câble Hook - 6.5' (2m)
- ∅ 1,2mm
- Cable length ; 6.5' (2m)

Galvanized Steel Câble Hook - 13' (4m)
- ∅ 1,2mm
- Cable length ; 13' (4m)

Galvanized Steel Câble Hook - 16.5' (5m)
- ∅ 1,2mm
- Cable length ; 16.5' (5m)

Galvanized Steel Câble Loop - 16.5' (5m)
- ∅ 1,2mm
- Cable length ; 16.5' (5m)

Galvanized Steel Câble Loop - 13' (4m)
- ∅ 1,2mm
- Cable length ; 13' (4m)

Galvanized Steel Câble Loop - 6.5' (2m)
- ∅ 1,2mm
- Cable length ; 2m (6,5′)

The Adjustable FC Gripper provided by Mustang Systems allows you to suspend and secure your installation. Quick installation, ajustable, aesthetic & resistant.

– FC50 working load up to 15 kg
– 5: 1 safety factor
– For cables up to 1.2mm

Pierced Shelf Support
- Drilled hole diameter 10mm (3/8’)

Floor to ceiling rail
- 6' - 6" (2m) Length
- Anodized aluminum finish

Rail support
 

T-bar Twist clip

- Diameter: 1/4"
- Dimensions: 1" x 1.5"

T-bar Twist clip

- Diameter: 1/4"
- Dimensions: 5/8" x 1"
- Compatible witht the cables and cable kits K15-PL2, K15-PL4 et K15-PL5

Single pierced support for panel
– Up to 1/4″ (6mm)
– Drilled holes: ∅ 4.76mm (3/16″)
– Cable diameter: 1.5mm


 

The Stainless Steel Cable provided by Mustang Systems is compatible with the C15-ACC2.

– Cable length ; 6m (20′)
– Breaking index ; 200 kg (440 lbs)
– Crimped steel tip
– 5: 1 safety factor

The Stainless Steel Cable provided by Mustang Systems is compatible with the C15-ACC2.

– Cable length ; 4m (13′)
– Breaking index ; 200 kg (440 lbs)
– Crimped steel tip
– 5: 1 safety factor

The Stainless Steel Cable provided by Mustang Systems is compatible with the C15-ACC2.

– Cable length ; 2m (6,5′)
– Breaking index ; 200 kg (440 lbs)
– Crimped steel tip
– 5: 1 safety factor

The Suspended Support provided by Mustang Systems is used to vertically suspend acrylic signs, panels & posters. The support is made of colorless clear anodized aluminum.

– Panel thickness up to 10mm (3/8″)
– Support ∅ 18,5mm (3/4″)

The Suspended Support provided by Mustang Systems is used to vertically suspend acrylic signs, panels & posters. The support is made of colorless clear anodized aluminum.

– Panel thickness up to 6mm (1/4″)
– Support ∅ 18,5mm (3/4″)

The Top Fixing Support provided by Mustang Systems is made of colorless clear anodized aluminum.

– Support ∅ 18,5mm (3/4″)

The Adjustable FC Gripper provided by Mustang Systems allows you to suspend and secure your installation. Quick installation, ajustable, aesthetic & resistant.

– FC50 working load up to 50 kg
– 5: 1 safety factor
– For cables from 1.5mm up to 2mm

The Beam Clip provided by Mustang Systems is ideal with hook end fixing and accomodates a wide variety of flange thickness.

– Hammer-on installation
– Flange thickness ; (5/16″ – 5/8″)
– Max SWL ; 90 kg
– 3: 1 safety factor

The Beam Clip provided by Mustang Systems is ideal with hook end fixing and accomodates a wide variety of flange thickness.

– Hammer-on installation
– Flange thickness ; (3/16″ – 5/16″)
– Max SWL ; 90 kg
– 3: 1 safety factor

The Beam Clip provided by Mustang Systems is ideal with hook end fixing and accomodates a wide variety of flange thickness.

– Hammer-on installation
– Flange thickness ; (1/16″ – 5/32″)
– Max SWL ; 72 kg
– 3: 1 safety factor

The Frame Support is made of colorless clear anodized aluminum. This support allows you to suspended panels & shelves.

Add 8mm to the left & 8mm to the right of your panel to calculate the distance between each ∅ 1,5mm cables.

– Support ∅ 18,5mm (3/4″)

The Ceiling Shield allows a nice finish to the hole made by the cable kit on the suspended ceiling.

– Support ∅ 18mm (3/4″)
- For cables up to 1.5mm diameter

The Cable Grip is made of anodized aluminum. The Threaded Ring combined with the Top Fixing allows you to suspended the ∅ 1,5mm cable for your signage & display project. It needs to be used in combination with the top fixing C15-ACC2.